18 of 40
Service Record Loop
SORG
RS
2019-07-16
3.3.1 Horizontal displacement of the seat plate
3.3
Assembly Group Seat
For moving the seat plate by 20 mm / 2 cm
with the same tilting path to increase the seat
depth:
• (1)
Remove the screw
(D)
of the seat
plate completely on both sides.
• (2)
Remove the screw connection
(F or
D)
of the gas spring
(E)
completely,
• put the seat plate in the alternative
position,
• and tighten the screwed connections
(1D)
again.
• Move the gas spring
(2E)
to the alterna-
tive position
(2F or 2D)
,
• put the screw back in
• and turn it tight.
We recommend a seat inclination of 3-5 °.
After any change to the seat unit and /
or tipping, the tipping behavior of the Loop-
SORGRS must be retested and practiced with
the help of an experienced, strong helper.
If the Loop
SORG
RS is equipped with two gas
pressure springs, proceed analogously.
(1)
(D)
(2)
(D)
(F)
(E)
(A)