Service Record Loop
SORG
RS
13 of 40
2019-07-16
(A)
(B)
(C)
(1)
The tires of the wheel must be at least 10 mm
away from the side panel or clothing guard.
Pay attention to the same distance left and
right!
(1)
To insert or remove the quick-release axle
fitting:
• loosen the screw connection
(B)
of the
fitting (also the lock nut
(2E)
on the
inside),
•
Turn the complete fitting
(C)
to the
desired position and
• Tighten all screw connections again
(tightening torque of nuts M18 fitting
35 Nm).
Be sure to check the functionality of the
knee lever brake and adjust if necessary.
Please note the colored discs for the correct
adjustment of the camber.
(2)
(A)
(E)
Version since 02/2017
The wheelchair is delivered with the appropriate toe-in, depending on the wheel camber adjust-
ment and attachment of the steering and pushing aid. When changing the camber or retrofitting
the steering or pushing aid, it may be necessary that the toe must be changed.
(1)
In order to avoid the so-called "eraser
effect", we generally assemble the matching
track compensation
(A)
at the factory. If the
camber is subsequently changed, it may be
necessary to replace the track compensation
adapter
(A)
with a suitable one (spare part).
To change toe-in:
• Remove drive wheels,
• and remove screw connection
(B+C)
.
•
• Depending on the mounting variant
and camber, please observe the instruc-
tions on the following pages.
• After changing the toe settings:
• replace the screws
(B+C)
and tighten the screws
(B)
.
• Check / correct the distance between the drive wheel and the side part or clothing pro-
tection by attaching the drive wheel.
3.1 Assembly Group Wheels
