Service Record Loop
SORG
RS
27 of 40
2019-07-16
3.5
Assembly Group Leg support
3.5.3 Leg supports which swing to the side
Setting distance between footrest and seat plate
• (1)
Remove both screws
(A)
,
• move the footrest/s and the alternative
holes
(B)
,
• replace both screws
(A)
and tighten
them.
When it comes to a continuous footrest you
must move both connections of the footrest
parallel on the leg support.
Angle setting
• (2)
If possible, close the footrest.
• Loosen the cylinder bolt
(A)
on both
sides until the clamp connection
(B)
loosens,
• set wanted angle,
• retighten cylinder bolt
(A)
.
Fine adjustment of the try square
• (3)
loosen lock nut
(A)
,
• turn the stop screw
(B)
in the wanted
position,
• retighten the lock nut
(A)
.
Depth adjustment of the footrest/s
• (4)
Remove the screws
(A)
on the foot-
rest/s,
• move the footrest/s in the holes
(B)
and
• retighten the screws.
Fine adjustment of the locking claw
• (5)
To do fine adjustments on the locking
claw
(A)
• loosen the nuts
(B)
on the bottom,
• move the holder
(C)
until the footrest
closes.
• Retighten the nuts.
(B)
(A)
(4)
(A)
(B)
(2)
(3)
(B)
(A)
(A)
(C)
(B)
(5)
(A)
(B)
(B)
(1)