Service Record Loop
SORG
RS
11 of 40
2019-07-16
3.1.3 Displacing the wheels without a camber adapter (20
"
,22
"
,24
"
)
(A)
(B)
(1)
(2)
(A)
(C)
(D)
(E)
(B)
• (1)
Remove the wheels,
• remove the hexagon nut
(A)
of the
quick-release axle fitting
(B)
,
•
place the fitting
(B)
in the new hole,
• put the hexagon nut
(A)
back on, tighten
it and
• place the wheels back on.
Correct the position of the knee lever
brake and be sure that it functions properly.
3.1.4 Displacing the wheels with a camber adapter (20
"
,22
"
,24
"
)
• (2)
Remove the wheels,
• remove the hexagon nut
(A)
of the
quick-release axle fitting
(B)
,
• remove the nut
(C)
from the brake arm
(D)
including the inner shell,
• remove both camber adapters
(E)
and
place them in front of the new position.
• Fixate both camber adapters
(E)
with the
fitting
(B)
and the shell in the new posi-
tion,
• replace the hexagon nut
(A)
and tighten
it,
• replace and tighten the nut
(C)
from the
spacer.
The Camber adapters must always be
mounted opposite. At 0°: inner surface=
thick end facing up.
Correct the position of the knee lever
and be sure that it functions properly.
3.1 Assembly Group Wheels
