16 of 40
Service Record Loop
SORG
RS
2019-07-16
3.2.1 Frame arche for closed frame
3.2
Assembly Group Frame
For retrofitting the frame bows for a frame
closed at the front, proceed in the same way
on both sides of the frame as follows:
• (1)
Remove the steering wheel adapter
(3A)
including the half-shells
(3B)
on
both sides as described,
• remove the knee lever brakes if neces-
sary (see chapter "Brakes")
• and remove the caps at the end of the
frame tubes
(A)
and
(B)
.
• (2)
Insert the supplied sleeve
(C)
from
the front into the upper frame tube and
screw tight with the screw
(D)
in the
hole
(E)
provided.
• Place the frame bow on top of the
mounted sleeve
(C)
and at the same
time insert the pin
(F)
into the lower
frame tube at the bottom.
• Screw the frame bow at the top with the
screw
(G)
to the sleeve
(C)
.
•
Check the tightness of the fittings
(D
and G)
.
• (3)
Move the steering wheel adapters
(A)
and half shells
(B)
from the old
holes
(E + F)
into the new holes
(F + G)
,
• Mount the adapters
(A)
including the
half shells
(B)
with the screws
(H)
in the
new position
(F + G)
• and adjust the steering wheels to an
absolutely vertical position.
• Possibly. you must re-assemble and
adjust the toggle brakes (see chapter
"Brakes").
The steering wheels must be mounted
in the new position as the frame bow is con-
nected to the frame with the screws
(H)
for
the steering wheel adapter.
(A) (B)
(C)
(D)
(E)
(F)
(G)
(A)
(E)
(F)
(G)
(H)
(B)
(1)
(2)
(3)
