1
Thank you for purchasing this Croydex product. Please follow the fixing and care instructions to ensure
your shower seat is fitted safely and retains its high quality finish.
Please retain this leaflet for future reference.
This installation guide applies to the following product:
AP110041 - Frosted Fold-Away Shower Seat
Tools required - not supplied
Pencil;Tape Measure; Screwdriver appropriate to fixings; Spirit level; Drill; Masonry drill bit appropriate to
fixings, Ceramic drill bit (optional) appropriate to fixings.
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Note: Please ensure suitable fixings are purchased that are compatible with wall construction materials.
Home Safety Advice
•
It is recommended that two people fit this product to ensure that it is fitted safely.
•
Always take care when using power tools, particularly in the bathroom.
•
Always check for hidden cables and pipework before drilling and take extreme care if there is any water
in the working area.
•
It is advisable to use a residual current circuit breaker (RCCB).
•
Always wear suitable eye protection when drilling.
•
If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used.
• Always ensure that the drill hole passes through the central tiled area rather than through the
grouted area. To prevent damage to the tile, mask the area around the hole with tape before drilling.
•
Do not strike the product with hard or sharp objects.
Product Care
To retain the best quality finish, clean product regularly with a soft damp cloth.
Do not use abrasive or chemical cleaners as these will damage the product.
Dry the shower seat after use.
Product Location
Shower seats are only as strong as the wall to which they are fixed and the fixings that are used.
For different wall types you will need to ensure that you are using the correct type of fixing for the material
of the wall.
The addition of backboards on the outside of the wall or appropriate strengthening of internal structures
may be required to provide adequate wall strength.
NOTE: If the wall is made of lightweight thermal blocks, aerated hollow brickwork or prefabricated
partitions even the most appropriate fixings may not be able to withstand the loads which can be
suddenly applied to shower seats.
S&H 050 R01
Shower Seat
