20
Ziris View Start-up and Configuration
Chapt
er
2 Get
ting St
ar
ted
Ziris View Start-up and Configuration
Follow the steps below to start Ziris View and configure
the URL settings for Ziris Edge and Ziris Manage. On
completion of these steps, all further settings are done
using Ziris Manage.
Ziris View will normally run automatically from a
PLAYSTATION®3 Game Disc. If it does not Auto-Start,
select Game > Ziris View on the PS3 menu to start.
If the disc is already inserted in the PS3 then Ziris View
should automatically start at power on.
1
Insert the PS3 Game Disc, Ziris View will start
automatically.
2
When Ziris View starts, the Ziris logo (or previously
loaded content) appears on the screen.
Press the
button to display the on-screen info/
menu page.
3
Use the Up/Down Direction buttons to highlight the
Ziris edge url
. Press
to display the on-screen
keyboard. You can type on the on-screen keyboard
using either the SIXAXIS controller or a USB
keyboard. Enter the URL in the format shown in the
example below using the correct IP address for the
Ziris Edge server associated with this device.
Repeat the same instructions to highlight and enter the
ZIRIS manage URL
.
You can enter using any of the following formats:
• IP address e.g. 192.168.1.100
• IP address and port e.g. 192.168.1.100:8080
• Full URL e.g. http://192.168.1.101:8080/zirisedge
• e.g. http://192.168.1.101:8080/zirismanage
Please make sure that both the address and port are
specified correctly on-screen in the final URL.
If no port is specified when you enter a URL, the default
HTTP port 80 will be used. This is not the default Ziris
Manage and Ziris Edge port address which is 8080.
4
Before exiting this page make a note of the Physical
Address (MAC), this is required by Ziris Manage.
Press the
button to confirm the settings and exit the
menu.
Exiting Ziris View
There are three ways to cleanly exit Ziris View.
To Exit to the PS3 menu:
• Touch the Eject button in the PS3 to eject the Game
Disc.
• Press the SIXAXIS PS button and select Quit Game
• Use Ziris Manage to schedule a Daily Restart and select
Exit Only, at Restart Time. See
To put the PS3 in standby:
• Touch the Power On/Off button until it beeps.
It is recommended that the PS3 is put into standby before
switching off the mains power.
In cases where it is not convenient to manually power off
the PS3, it is recommended to schedule Ziris View to exit
to the PS3 menu before switching off the mains power.
Note
Note
Note
