32
Before Using the Terminal
･
Use a compatible AC adapter or microUSB
cable for charging. If you use a charger other
than compatible ones, charging may not be
available or operations may not be performed
correctly.
･
Insert and remove the AC adapter cable or
microUSB cable slowly and evenly so that
excessive force is not applied.
･
When charging starts, notification LED of the
terminal turns on (P.42).
･
To check the battery level, see the status bar at
the top of the screen or from the Home
screen, tap
u
[Settings]
u
[About
phone]
u
[Status] to see "Battery level".
･
When you start charging with the terminal
powered off, the power turns on. However,
you cannot operate the terminal. Power off
the terminal in a place where the use is
prohibited such as in airplane or hospital for
this reason.
When using supplied Desktop Holder SO20
and AC Adapter 04 (optional) for charging, do
the following procedures.
･
Be sure to attach the supplied attachment
(Attachment 37A or Attachment 37B) to the
Desktop Holder when charging (P.33). The
terminal cannot be charged on the Desktop
Holder without attachment.
1
Insert a microUSB plug of the AC
adapter into the charging jack on
the back side of the desktop
holder with the engraved side (B)
facing up (
).
Charging with Desktop Holder
A
C
adapter
Desktop
holder
Noti
fi
cation
LED
microUSB
plug
Charging
jack
Summary of Contents for Xperia Z2 SO-03F
Page 1: ...14 4 INSTRUCTION MANUAL ...
