Sony XDCAM PDW-510, Operation Manual

Page: 151 / 222

Ch
apt
er 8
Sa
v
ing an
d Load
ing Us
er Se
tt
ing
Dat
a
151
8-1 Saving and Loading User Files to and from a “Memory Stick”
4
Turn the MENU knob until the page which contains
the desired file number appears, then press the MENU
knob.
5
Turn the MENU knob to move the
b
mark to the
desired file number to be loaded, and press the MENU
knob.
The message “LOAD OK? YES
b
NO” appears.
6
To carry out the load, move the b mark to “YES” and
press the MENU knob.
To cancel, press the MENU knob leaving the
b mark
pointing to “NO”.
The access indicator lights.
When the load is completed, the message
“COMPLETE” appears and the access indicator goes
off.
The USER FILE page appears again.
7
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
If data cannot be loaded
If one of the following error messages appears during or
after the load operation, then the data was not loaded.
Data load error messages
?P00 USER LOAD
DISPLAY MODE : ALL
001.USER1 JAN/01/04
002.USER2 JAN/15/04
003.NO FILE
004.USER4 FEB/05/04
005.USER5 FEB/20/04
ESC
P00 USER LOAD
DISPLAY MODE : ALL
001.USER1 JAN/01/04
002.USER2 JAN/15/04
003.NO FILE
004.USER4 FEB/05/04
005.USER5 FEB/20/04
ESC
P00 USER LOAD
LOAD OK? YES NO
DISPLAY MODE : ALL
001.USER1 JAN/01/04
002.USER2 JAN/15/04
003.NO FILE
004.USER4 FEB/05/04
005.USER5 FEB/20/04
ESC
Error message Cause Action
NO MEMORY
STICK (flashing) No “Memory
Stick” is inserted. Insert or reinsert the
“Memory Stick”.
MEMORY STICK
ERROR
(flashing) Circuit or
“Memory Stick”
fault. Recheck, and
consult your Sony
representative.
FILE ERROR
(flashing) The “Memory
Stick” contains
data that cannot
be loaded into this
camcorder. Do not try to load
data saved from
another camcorder.