Sony WH-XB910N, Help Manual

Page: 63 / 129

Help Guide
Wireless Noise Canceling Stereo Headset
WH-XB910N
Using the supplied headphone cable
If you use the headset at a place where it is restricted to use Bluetooth devices such as on an airplane, you can use the
headset as noise canceling headphones while the headset is connected to a device via the supplied headphone cable
and the headset is turned on.
Hint
You can listen to music even if the headset is turned off. In this case, the noise canceling function cannot be used.
To use the noise canceling function/Ambient Sound Mode, turn the headset on.
The headset turns off automatically if you disconnect the supplied headphone cable from the headset while it is turned on.
When an incoming call arrives, a ring tone is heard via the headset. Answer the call using your smartphone or mobile phone, and
talk using the microphone of the phone. You can hear the caller’s voice from the headset. If you disconnect the headphone cable
from the smartphone or mobile phone, you can talk using the microphone and speaker of the phone.
Note
Use the supplied headphone cable only.
Make sure you insert the plug firmly.
When using the headphone cable, the Bluetooth function cannot be used.
You can use Quick Attention Mode while the headset is connected to a device via the supplied headphone cable and the headset
is turned on. Perform operations, such as adjusting the volume and play/pause, on the playback device. When the headset is
turned off, you cannot use Quick Attention Mode.
The NC/AMB (noise canceling/Ambient Sound Mode) button cannot be used when the headset is turned off.
Related Topic
Using the noise canceling function
Listening to ambient sound during music playback (Ambient Sound Mode)
Listening to ambient sound quickly (Quick Attention Mode)
5-031-015-11(2) Copyright 2021 Sony Corporation
Connect a playback device to the headphone cable input jack with the supplied headphone cable.
Be sure to connect the L-shaped plug into the connecting device.
1
63