Sony WH-XB910N, Help Manual

Page: 117 / 129

Help Guide
Wireless Noise Canceling Stereo Headset
WH-XB910N
Low sound quality
Turn down the volume of the connected device if it is too loud.
When playing music, if the headset and the transmitting Bluetooth device are connected via an HFP or HSP
Bluetooth connection, switch the Bluetooth connection to A2DP with the connected device.
When using a video calling application on a computer, switch the Bluetooth connection to HFP or HSP with the
computer.
During a video call, sound quality may become low due to the conditions of the communication line.
If the headset connects to the previously connected Bluetooth device, the headset may only establish the HFP/HSP
Bluetooth connection when it is turned on. Use the connected device to connect via an A2DP Bluetooth connection.
When listening to music from a computer on the headset, the sound quality may be poor (e.g., difficult to hear the
singer’s voice, etc.) for the first few seconds after a connection is established. This is due to the computer
specifications (priority on stable connection at the start of transmission and then switches to priority on sound quality
several seconds later) and is not a headset malfunction.
If the sound quality does not improve after a few seconds, use the computer to establish an A2DP connection. As for
the operations on your computer, refer to the operating instructions supplied with the computer.
When [Connect to 2 devices simultaneously] is turned on with the “Sony | Headphones Connect” app, LDAC cannot
be used. If you want to use LDAC for music playback, turn [Connect to 2 devices simultaneously] off.
Related Topic
Listening to music from a device via Bluetooth connection
Making a video call on your computer
What you can do with the “Sony | Headphones Connect” app
Connecting the headset to 2 devices simultaneously (multipoint connection)
Supported codecs
5-031-015-11(2) Copyright 2021 Sony Corporation
117