Sony WH-XB910N, Help Manual

Page: 124 / 129

Help Guide
Wireless Noise Canceling Stereo Headset
WH-XB910N
The touch sensor control panel does not respond correctly.
The sensor of the touch sensor control panel is built into the flat surface of the right unit. Operate within the range of
the sensor.
When you swipe your finger forward/backward or up/down on the touch sensor control panel, the touch sensor
control panel may not work correctly depending on the angle at which the headset is worn or the direction your head
is facing.
When you swipe your finger forward/backward, make the movements perpendicular to the headband.
When you swipe your finger up/down, make the movements parallel to the headband.
Note
While the headset is connected to a device via the supplied headphone cable and the headset is turned on, you can use Quick
Attention Mode, but you cannot perform operations such as volume adjustment or play/pause.
The headset will not operate correctly when you operate the headset with your fingernail or a gloved hand. Remove your glove,
and operate the headset with the ball of your finger.
Check that the touch sensor control panel setting is enabled with the “Sony | Headphones Connect” app.
When connected with the computer, depending on the computer application you are using, you may not be able to operate with
the touch sensor control panel, but this is not a malfunction. Operate with the computer application.
124