Sony VAIO PCV-1126 User Manual Download Page 79

Page: 79 / 119

Sony V

Desktop User

Guide

Getting help

The message 'Press

<F1>

to continue,

<F2>

to enter setup' appears at startup

This message is telling you to initialise the BIOS (Basic Input/Output System).

To do so, proceed as follows:

Turn off the computer.

Remove any peripheral devices connected to the computer.

Turn on the computer and press

<F2>

when the

Sony

logo appears.

The BIOS setup menu screen appears.

Use the keyboard’s arrow keys to select the

Exit

menu.

Press

<F5>

or use the arrow keys to select

Load Setup Defaults

and then press

<Enter>

The message

Load Setup Defaults?

appears.

Make sure that

Yes

is selected and then press

<Enter>

Press

<F10>

to exit, or use the arrow keys to select

Save Changes

and then press

<Enter>

The message

Save configuration changes and exit now?

appears.

Make sure that

Yes

is selected and then press

<Enter>

Summary of Contents for VAIO PCV-1126
























































































































Search results

Summary of Contents for VAIO PCV-1126

Reviews:

Related manuals for VAIO PCV-1126

Brands by name

Popular brands

Sony VAIO PCV-1126, User Manual

Search results

Summary of Contents for VAIO PCV-1126

Reviews:

Related manuals for VAIO PCV-1126

Brands by name

Popular brands