background image

Using the System Recovery CDs 

The System Recovery CDs enable you to format your hard disk drive and restore the operating system and all original,
preinstalled programs. If the operating system or programs become corrupted or are erased, you can restore your
computer to the original factory settings. 

   

The System Recovery process removes all programs that you may have installed since you started using your

computer. Reinstall any program that was not included with the computer when you purchased it. 

You may not need to reinstall the entire contents of your hard drive. If you experience a problem with your computer,
reinstalling an individual device driver or program may correct the problem. Use the Application Recovery CDs to reinstall
individual programs and device drivers. See 

Using the Application Recovery CDs

 for more information. 

The System Recovery CDs contain a backup copy of all the programs originally installed on your hard disk. It can be used
only to recover the hard disk of the Sony computer you purchased. 

When you successfully complete your system recovery, you are prompted to complete the Windows

®

 registration process. 

System Recovery options 

Default System Drive Recovery

 — All data on Drive C is deleted. The factory default settings and programs are

restored on this drive only. 

Change Partition Size and Recover 

— All partitions, custom installations, and changes are removed from the hard

drive. You can set the partition sizes for both Drive C and Drive D. The original, preinstalled operating system and
programs are restored. 

Factory Default Settings Recovery 

— All data and partitions are removed from the hard drive. All original factory

settings, the operating system, and preinstalled programs are restored. 

   

The System Recovery utility does not back up your system's data. If you wish to retain your system data,

perform a backup to an external media. 

To use the System Recovery CDs 

Your system may take a few minutes to load necessary files. A blue screen may appear during the downloading process. 

Your system may include one or more System Recovery CDs. If you have more than one System Recovery CD, insert the first
CD (CD No. 1) to run the System Recovery program. You will be prompted to insert the next CD(s) once the information from
the first CD has been installed. 

1.

Press the disc eject button to open the optical disc drive and extend the disc tray. 

2.

Insert the Sony System Recovery CD No. 1 into the optical drive, and close the drive. The first CD must be in the
drive before you restart your computer. 

3.

(Windows XP) Turn off your computer by clicking 

Start

Turn off computer

, and selecting

 Turn Off

.

(Windows 2000) Turn off your computer by clicking 

Start

Shut Down

, and selecting

 Shut Down

4.

Wait at least 30 seconds, and turn on your computer. The System Recovery utility restarts from the optical drive.
Your screen displays the downloading progress, "Starting VAIO Recovery Utility." 

5.

When the 

VAIO System Recovery Utility

 wizard appears, click 

Next

6.

The Notes on Use window appears. Click 

Next

7.

On the Main Menu - Product Recovery window, select the appropriate option to recover your system. 

8.

Follow the on-screen instructions to complete the recovery process. 

  

  The recovery process takes approximately 30 to 60 minutes to complete. 

After recovering your system using the System Recovery CD(s), you may be prompted to insert your Application Recovery
CD(s) after restarting Windows. Use the Application Recovery CD(s) to complete full restoration of your system. 

If your computer does not start from the Recovery CD 

Page 203

Summary of Contents for VAIO PCG-GRX700K





















































































































































































































Reviews: