Sony SLV-SF900G Operating Instructions Manual Download Page 68

Page: 68 / 110

Connecting to a VCR or stereo system

filename[01GBedit-NP0.fm] model name1[SLV-SF900G(ENG)] model name2[]

[3-062-327-11 (1)]

How to connect to a stereo system

Connect the LINE-2 IN AUDIO L/R jacks on your VCR to the audio output jacks on
the stereo system using the RK-C510HG audio cable (not supplied).

Notes

• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect your VCR to both the LINE IN and LINE OUT jacks of the other VCR, select

the input correctly to prevent a humming noise.

• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-2106HG cable

instead and connect the cable to the line out jacks of the other VCR.

Tip

• You can also use the LINE-3 IN connector instead.

Summary of Contents for SLV-SF900G















































































































Search results

Summary of Contents for SLV-SF900G

Reviews:

Related manuals for SLV-SF900G

Brands by name

Popular brands

Sony SLV-SF900G, Operating Instructions Manual

Search results

Summary of Contents for SLV-SF900G

Reviews:

Related manuals for SLV-SF900G

Brands by name

Popular brands