Sony SLV-SF900G Operating Instructions Manual Download Page 60

Page: 60 / 110

Recording stereo and bilingual programmes

filename[01GB06ADD-NP0.fm] model name1[SLV-SF900G(ENG)] model name2[]

[3-062-327-11 (1)]

How sound is recorded on a video tape

The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the
main track along with the picture. Monaural sound is recorded onto the normal audio
track along the edge of the tape.

Notes

• To listen to playback sounds in stereo, you must use the EURO-AV or AUDIO OUT

connections.

• When you play a tape recorded in monaural, the sound is heard in monaural regardless of the

AUDIO MONITOR setting.

• If the AUDIO MONITOR button does not function, check that AUDIO MIX in the AUDIO

OPTIONS menu is set to OFF (see page 65).

• If HIFI AUDIO is set to STANDARD, the standard sound will be recorded on both the hi-fi

and normal audio tracks. Pressing AUDIO MONITOR will not change the sound.

Usually main sound

Normal audio track
(monaural)

Stereo

Usually mixed
left/right channels

Stereo sound
(left/right channels)

Hi-fi audio track
(main track)

Bilingual

Main (left channel)
Sub (right channel)

Summary of Contents for SLV-SF900G















































































































Search results

Summary of Contents for SLV-SF900G

Reviews:

Related manuals for SLV-SF900G

Brands by name

Popular brands

Sony SLV-SF900G, Operating Instructions Manual

Search results

Summary of Contents for SLV-SF900G

Reviews:

Related manuals for SLV-SF900G

Brands by name

Popular brands