Sony SLV-SF900G Operating Instructions Manual Download Page 39

Page: 39 / 110

Basi

c O

erati

Playing a tape

filename[01GB05BAS-NP0.fm] model name1[SLV-SF900G(ENG)] model name2[]

[3-062-327-11 (1)]

Starting playback automatically with one button (One
Touch Play)

If you use the SMARTLINK connection, you can turn on the VCR and the TV, set the
TV to the video channel, and start playback automatically with one button.

Tip

• When there already is a tape in the VCR, the VCR and the TV turn on, the TV is set to the

video channel, and playback starts automatically in one sequence when you press

PLAY.

Note

• When you use the One Touch Play function, leave the TV on or in the standby mode.

Insert a tape.

The VCR automatically turns on.

If you insert a tape with its safety tab removed, the TV turns on and switches to
the video channel. Playback starts automatically.

Press

PLAY.

The TV turns on and switches to the video channel automatically. Playback
starts.

Summary of Contents for SLV-SF900G















































































































Search results

Summary of Contents for SLV-SF900G

Reviews:

Related manuals for SLV-SF900G

Brands by name

Popular brands

Sony SLV-SF900G, Operating Instructions Manual

Search results

Summary of Contents for SLV-SF900G

Reviews:

Related manuals for SLV-SF900G

Brands by name

Popular brands