Sony SLV-AV100UX Operating Instructions Manual Download Page 78

Page: 78 / 90

Editing

Audio dubbing

This feature lets you record over the normal audio track. The monaural
sound previously recorded is replaced while the original hi-fi sound
remains unchanged. Use this feature to add music to a tape you have
recorded with a camcorder.

Before you start dubbing…

• Press VHS TUNER.

– If the TV doesn’t turn on, turn it on manually.

Press VHS TUNER again if connected with a EURO-AV (Scart)
cable.

– If connected with a EURO-AV (Scart) cable, the TV is automatically

set to VCR reception.

– If connected with only the antenna cable, set the TV to the VCR’s

programme position manually.

• Do not use the remote commander in the following procedure.

Insert a prerecorded tape with its
safety tab in place into this
(recording) VCR.

Search for the end of the section
to be dubbed and press

PAUSE.

Press COUNTER RESET on this unit
to reset the counter to
“0H00M00S.”

Rewind the prerecorded tape to
the beginning of the section to be
dubbed.

The unit’s VCR pauses.

Insert a source tape, MD, CD, etc.
into the playback component
connected to the unit.

Press AUDIO repeatedly to select
the input (playback) source.

Search for the point to start
playback and set it to playback
pause.

Press AUDIO DUB.

The audio dubbing indicator

appears

in the display window.

AUDIO

PAUSE

AUDIO
DUB

COUNTER
RESET

Summary of Contents for SLV-AV100UX



























































































Search results

Summary of Contents for SLV-AV100UX

Reviews:

Related manuals for SLV-AV100UX

Brands by name

Popular brands

Sony SLV-AV100UX, Operating Instructions Manual

Search results

Summary of Contents for SLV-AV100UX

Reviews:

Related manuals for SLV-AV100UX

Brands by name

Popular brands