29
Getting Started
Getting Started
Manual setup —
Setting the clock
You must set the time and date on the unit to be able to use the timer
recording features. If the unit clock was not set in the EASY SET UP
procedure, you need to set it manually.
If Auto Clock Set did not set the clock correctly for your local area, try
another station for Auto Clock Set.
Before you start…
• Press VHS TUNER.
– If the TV doesn’t turn on, turn it on manually.
Press VHS TUNER again if connected with a EURO-AV (Scart) cable.
– If connected with a EURO-AV (Scart) cable, the TV is automatically
set to VCR reception.
– If connected with only the antenna cable, set the TV to the VCR’s
programme position manually.
Setting the clock manually
1
Lift the top cover of the remote commander.
Press MENU. Then press CURSOR
>
/
.
to move the cursor (
I
) to
VHS MENU, and press EXECUTE.
2
Press CURSOR
>
/
.
to move the cursor (
I
) to CLOCK SET and press
EXECUTE.
When using the EASY SET UP procedure, skip this step.
3
Press CURSOR
/
to highlight the date and the day of the week.
4
Press CURSOR
>
/
.
to set the date.
The day of the week is set automatically.
EXECUTE
MENU
CURSOR
>
/
.
/
?
/
/
Tip
• To change the digits during
setting, press CURSOR
?
to return to the item to be
changed, and select the
digits using CURSOR
>
/
.
.
Note
• The menu disappears
automatically if you don’t
proceed within a few
minutes.
continued
CLOCK SET
END
SET
:
:
SELECT
:
MON
. 1 1
. 9 9 6
0 : 0 0
AUTO ADJUST
1
ON
OFF
EXECUTE
EXECUTE
CLOCK SET
END
SET
:
:
SELECT
:
MON
. 1 1
. 9 9 6
0 : 0 0
ON
OFF
AUTO ADJUST
1
EXECUTE
CLOCK SET
END
SET
:
:
SELECT
:
SAT
. 1 1
. 9 9 6
0 : 0 0
ON
OFF
AUTO ADJUST
7
2
VHS MENU
T I
TUNER PRESET
CLOCK SET
SET UP CH & VIDEO Plus+
MER SET / CHECK
SET UP MENU
EXIT
SET
:
:
EXECUTE
SELECT
:
MENU
