Sony SLV-AV100UX Operating Instructions Manual Download Page 35

Page: 35 / 90

Basic VCR Operations

Recording TV
programmes

Press VHS TUNER.

• If the TV doesn’t turn on, turn it on manually.

Press VHS TUNER again if connected with a EURO-AV (Scart)
cable.

• If connected with a EURO-AV (Scart) cable, the TV is

automatically set to VCR reception.

• If connected with only the antenna cable, set the TV to the

VCR’s programme position manually.

Insert a tape with its safety tab in place.

Press PROG//– to select the programme position
you want to record.

Lift the top cover of the remote commander and press
TAPE SPEED to select the tape speed, SP or LP.

LP provides twice as much recording time as SP, however, SP
produces better picture and audio quality.

Press

REC to start recording.

>10

VHS TUNER

PROG/PRESET
+/–

TAPE SPEED
(SP/LP)

R E C

Tips

• To select a programme

position, you can use the
programme number buttons
on the remote commander.
For two-digit numbers,
press the

(tens digit)

button followed by the
programme number
buttons.

• You can select a video

source (e.g. a satellite tuner)
connected to the EURO
LINE IN connector by
pressing VHS LINE, or
PROG//–
repeatedly, until “LINE” is
displayed on the TV screen.

(continued)

To stop recording

Press

STOP.

To check the remaining tape length

Press DISPLAY. The display function turns on. The white bar indicates
the approximate length of tape remaining.

0 : 00 : 22

Sound field mark (See page 34.)

Programme position/
Input source indication
(See page 44.)

Remaining tape length

Time counter

To watch another TV programme while recording

Press TV CONTROL ON on the remote commander.

“VTR” in the display window disappears.

Select another programme position on the TV.

VTR

continued

Summary of Contents for SLV-AV100UX



























































































Search results

Summary of Contents for SLV-AV100UX

Reviews:

Related manuals for SLV-AV100UX

Brands by name

Popular brands

Sony SLV-AV100UX, Operating Instructions Manual

Search results

Summary of Contents for SLV-AV100UX

Reviews:

Related manuals for SLV-AV100UX

Brands by name

Popular brands