Sony SLV-AV100UX Operating Instructions Manual Download Page 61

Page: 61 / 90

Sound Field Operations

Taking advantage of
the sound fields

You can enjoy the surround sound effect by simply selecting one of the
pre-programmed sound fields according to the type of playback source.

Select the input source.

Select the sound field. (See “Using the pre-programmed sound
fields” on page 34.)

You can set the sound effect independently for each input source.

Selecting the sound field

Select

You need the following speakers

PROLOGIC

THEATRE

MONO MOVIE

HALL

STADIUM

GAME

ACOUSTIC

OFF

Fully enjoy programmes processed with Dolby Pro Logic
Surround sound (See “What’s Dolby Surround and Dolby Pro
Logic Surround?” on the next page.)

Add the acoustic reflections of a theatre to the decoded Dolby
Surround signals (See “What’s Dolby Surround and Dolby
Pro Logic Surround?” on the next page.)

Create a theatre-like environment for movies with monaural
soundtracks (See “What’s surround sound?” on the next
page.)

Reproduce the acoustics of a hall (See “What’s surround
sound?” on the next page.)

Reproduce the feeling of a large open-air stadium (See
“What’s surround sound?” on the next page.)

Obtain maximum audio impact from video game software
(See “What’s surround sound?” on the next page.)

Reproduce normal 2 channel stereo

Turn off the sound effect

See “Selecting the centre mode” on page 18.

The surround (rear left and right) speakers as
well as the front left and right speakers

Only the front left and right speakers

continued

To temporarily turn off the sound effect you set

Select the input source for the sound effect you want to turn off.

Press SURROUND on the unit to turn off the sound effect.

To resume the previous sound effect, press SURROUND again.

Summary of Contents for SLV-AV100UX



























































































Search results

Summary of Contents for SLV-AV100UX

Reviews:

Related manuals for SLV-AV100UX

Brands by name

Popular brands

Sony SLV-AV100UX, Operating Instructions Manual

Search results

Summary of Contents for SLV-AV100UX

Reviews:

Related manuals for SLV-AV100UX

Brands by name

Popular brands