Sony SLV-AV100UX Operating Instructions Manual Download Page 77

Page: 77 / 90

Editing

Recording from
another VCR or LD
player

Before you start editing

• Connect another VCR or LD player to the unit referring to the

connections on pages 10 through 12.

• Press VHS TUNER.

– If the TV doesn’t turn on, turn it on manually.

Press VHS TUNER again if connected with a EURO-AV (Scart)
cable.

– If connected with a EURO-AV (Scart) cable, the TV is automatically

set to VCR reception.

– If connected with only the antenna cable, set the TV to the VCR’s

programme position manually.

• Press TAPE SPEED to select the tape speed, SP or LP.
• On this unit, press EDIT so “EDIT” appears in the display window. If

the other VCR has a similar switch, set it to ON as well.

• Do not use the remote commander in the following procedure.

Insert a tape with its safety tab in
place into the unit (recording
VCR).

Search for the point to start
recording and press

PAUSE.

Press

REC on the unit to set it to

recording pause.

• Insert a source tape with its

safety tab removed into the
other (playback) VCR when
recording from another VCR.

• Insert an LD into the LD player,

when recording from an LD
player.

Press VIDEO or VHS repeatedly to
select the input (playback) source
(VIDEO1, VIDEO2, or LINE).

Search for the point to start
playback and set it to playback
pause.

To start editing, press

PAUSE on

this unit and release the pause
mode on the other equipment at
the same time.

To stop editing

Press the

STOP buttons on both units.

EDIT

PAUSE

VHS

VIDEO

R E C

Tips

• To cut out unwanted

scenes while editing,
press

PAUSE on the

unit when an unwanted
scene begins. When it
ends, press

PAUSE

again to resume recording
(Assemble Editing).

• You can record audio sound

from the desired input
source on the video tape by
pressing AUDIO repeatedly
in step 4.

Note

• If you follow this procedure

to start recording, the unit’s
VCR won’t record with the
OPC function. To record a
tape with the OPC function,
press

REC again during

recording pause in step 2 so
the unit’s VCR analyses the
tape. Then when you start
recording in step 6, press

PAUSE after the OPC

indicator stops flashing. If
you press

PAUSE before

the OPC indicator stops
flashing, the OPC function
is cancelled.

Summary of Contents for SLV-AV100UX



























































































Search results

Summary of Contents for SLV-AV100UX

Reviews:

Related manuals for SLV-AV100UX

Brands by name

Popular brands

Sony SLV-AV100UX, Operating Instructions Manual

Search results

Summary of Contents for SLV-AV100UX

Reviews:

Related manuals for SLV-AV100UX

Brands by name

Popular brands