45
Audio/Video Equipment Operations
Function buttons on the unit (FUNCTION)
Press the
following button
repeatedly
VHS
VIDEO*
1
AUDIO
Then the unit’s input
switches to the
Unit’s VCR
EURO LINE IN connector
EURO-AV connector
VIDEO1 (VIDEO IN,
AUDIO L/R IN) jacks
VIDEO2 INPUT (VIDEO,
AUDIO L/R) jacks
TUNER (AUDIO L/R IN)
jacks
CD (AUDIO L/R IN) jacks
TAPE/MD (AUDIO L/R
IN) jacks
Until the following
indication appears on
the TV screen
Programme position
LINE
(TV)*
2
VIDEO1
VIDEO2
TUNER
CD
TAPE/MD
VIDEO1
*
1
If the TV is connected to the unit with only the aerial cable, the unit’s speakers do
not reproduce the sound even if you select the TV with this button. When you use
the TV tuner, press TV CONTROL ON (see “Using the TV independently” on page
50).
*
2
“TV” usually doesn’t appear on the TV screen. If another monitor is connected to
the MONITOR VIDEO OUT jack, “TV” appears on the monitor screen.
Watching a picture while listening to audio
equipment
If you change the input from a video source to an audio source, the
sound will be switched to the audio source but the picture continues to
be output. The last selected video source’s indicator remains lit in the
display window.
Before operating audio/video equipment
• Connect all the components securely and correctly as indicated on
pages 6 through 12.
• Turn MASTER VOLUME to the leftmost position (0) to avoid
damaging the speakers.
• Note that you may not be able to control all the functions of the
equipment described in these Operating Instructions with the remote
commander. In this case, refer to the operating instructions of each
piece of equipment.
If there is any function you cannot control with the remote
commander, use the remote control of each piece of equipment.
continued
