51
(EN)
Others
Specifications
Optical characteristics
Projection system Digital Micromirror Device
TM1)
(DMD) 3 panel prism color
integration system
DMD
508,800 pixels (848 (horizontal)
×
600 (vertical))
Light output
1800 ANSI lm
2)
(when using 200 V
AC or more and LIGHT BOOST
set to ON)
1200 ANSI lm
2)
(when using 100 to
120 V AC or using 200 to 240 V
with LIGHT BOOST set to OFF)
Lamp
1 kW Xenon lamp
Projection picture size
Range: 100 to 600 inches
(diagonally measured)
Electrical characteristics
Color system
NTSC
3.58
/PAL/SECAM/NTSC
4.43
/
PAL-M system, switched
automatically
Resolution
500 horizontal TV lines (video
input)
848
×
600 pixels (RGB input)
Acceptable computer signal
fH:15 to 65 kHz
fV:50 to 120 Hz
Input/Output
CONTROL S
IN/PLUG IN POWER:
Stereo minijack type, 5 Vp-p,
Plug in power: DC 5 V, maximum
output 60 mA
OUT: Stereo minijack type, loop
through output of CONTROL S
IN
REMOTE
RS-422A: D-sub 9-pin (female)
(For details, see “Pin assignment”
on page 53.)
TRIG
Monaural minijack type, 5 Vp-p,
impedance more than 4.7 kohms
S VIDEO (priority to Y IN/C IN)
IN/OUT: Mini DIN 4-pin type
(male)
Y (luminance) signal: 1 Vp-p
±2 dB sync negative, 75 ohms
terminated
C (chrominance) signal: Burst
0.286 Vp-p ±2 dB 75 ohms
terminated (NTSC), 0.3 Vp-p
±2 dB 75 ohms terminated (PAL)
Y IN: BNC-type
Y (luminance) signal: 1 Vp-p ±2
dB sync negative, 75 ohms
terminated
C IN: BNC-type
C (chrominance) signal: Burst
0.286 Vp-p ±2 dB sync negative,
75 ohms terminated (NTSC),
0.3 Vp-p ±2 dB sync negative,
75 ohms terminated (PAL)
VIDEO
IN/OUT: BNC-type (loop-through
between IN and OUT),
Composite video: 1 Vp-p ±2 dB
sync negative, 75 ohms
terminated
INPUT A
Analog RGB/component
R/R-Y: BNC-type
Red input: 0.7 Vp-p ±2 dB
positive, 75 ohms terminated
G/Y: BNC-type
Green input: 0.7 Vp-p ±2 dB
positive, 75 ohms terminated
Green with sync:BNC-type,
1 Vp-p ±2 dB sync negative,
75 ohms terminated
B/B-Y: BNC-type
Blue input: 0.7 Vp-p ±2 dB
positive, 75 ohms terminated
SYNC/HD: BNC-type
Composite sync: 0.6 to 8 Vp-p,
high impedance, positive/negative
Horizontal sync: 0.6 to 8 Vp-p,
high impedance, positive/negative
VD: BNC-type
Vertical sync: 0.6 to 8 Vp-p, high
impedance, positive/negative
INPUT B
REMOTE 1 IN/OUT: 14-pin
(For details, see “Pin assignment”
on page 53.)
..........................................................................................................................................................................................................
1) Digital Micromirror Device
TM
is a trademark of Texas Instruments Incorporated, U.S.A.
2) ANSI lumen is a measuring method of American National Standard IT 7.215.
Other
s
