17
(EN)
Projecting
4
Press the PATTERN key on the Remote Commander or the control
panel to display the test pattern.
To clear the test pattern, press the PATTERN key again.
5
Press the FOCUS +/– keys on the Remote Commander or the control
panel to adjust the focus.
“FOCUS” appears on the screen during adjustment.
6
Press the ZOOM +/– keys on the Remote Commander or the control
panel to adjust the zoom.
“ZOOM” appears on the screen during adjustment.
Note
When the VPDL-FP30 fixed short focus lens is attached to the projector,
you cannot use the zoom function.
7
Press the SHIFT +/– keys on the Remote Commander or the control
panel to adjust the vertical position of the picture.
“PICTURE SHIFT” appears on the screen during adjustment.
To cut off the picture
Press the MUTING PICTURE key on the control panel or the MUTING
PIC key on the Remote Commander. To restore the picture, press the
MUTING PICTURE or MUTING PIC key again.
Notes
• The operating temperature guaranteed for the projector is 10°C to 35°C
(50°F to 95°F). When the temperature around the projector is out of the
operating temperature range, no picture may appear on the screen even if
you turn the power on. (
75
or
27
lights up in the error code display
window.) In this case, adjust the temperature around the projector.
When the temperature sensor for the lamp power or the lamp housing
functions, the lamp may turn off. (
23
or
24
lights up in the error code
display window.)
For details on the error codes, see “Error codes” on page 50.
• Do not look into the lens when the projector lamp is on.
• When you adjust the focus, zoom and shift using the Remote
Commander, set the SWITCHER/INDEX/LENS switch to LENS.
Pr
ojecting
