11
(EN)
Overview
R/R-Y
G/Y
B/B-Y SYNC/HD VD
CONTROL S
OUT
IN
PLUG IN
POWER
TRIG
Y IN
C IN
IN
OUT
IN
OUT
S VIDEO
VIDEO
INPUT A
AC IN
BREAKER ON/OFF
RS-422A
INDEX
REMOTE
0
1
ON
ON
1
2
3
4
5
0
6
IN
REMOTE 1
OUT
MODE
9
8
7
Input/output connectors
1
BREAKER ON/OFF switch
Turns the main power on and off.
2
CONTROL S IN/OUT (control S signal input/
output) jacks (stereo minijack)
Connect to the CONTROL S connectors of other Sony
equipment.
CONTROL S IN/PLUG IN POWER (5 V output)
jack:
Connects to the CONTROL S
OUT jack on
the supplied Remote Commander with the
supplied Remote Commander cable when using it
as a wired Remote Commander. The power for the
Remote Commander is supplied via this jack.
CONTROL S OUT jack:
Outputs the control S
signal.
3
REMOTE RS-422A connector (D-sub 9-pin,
female)
Connects to a computer to control the projector.
4
INDEX (index number) switches
Set the index number for each projector when using
multiple projectors. You can set the numbers between
01 to 99.
You can check the index number using the menu.
Note
Do not use the index number “9” when using the
supplied Remote Commander.
5
TRIG (trigger output) jack (minijack)
Transmits approximately 5 V trigger signal to external
equipment when the power is on. This is not a power
source.
6
INPUT A connectors
Input the video signals of a component VCR or a
computer.
RGB input connectors (R-R/Y, G/Y, B/B-Y,
SYNC/HD, VD) (BNC-type):
Connect to the
monitor output connectors on a component VCR
or a computer.
(Continued)
