45
(EN)
Installation/Connection Examples
Using Stacked Projectors
You can stack up to four projectors. This section
describes connections for using stacked projectors.
For details on designating the input, see pages 13 and 20.
To set the index number
Set the index number of each projector so that you can
select it by the index number from the Remote
Commander.
To set the index number, use the INDEX switches on
the rear of the projector.
Notes
• Do not set the same index number twice in one
system.
• Do not make intervals of over 8 between the index
numbers.
• Do not use the index number “9” when selecting the
projector with the supplied Remote Commander.
• When the index number is “00,” you cannot use the
Remote Commander.
Ten’s digit
0
1
Unit’s digit
(Continued)
