DVD
Re
co
rd
in
g
53
1
Press DVD to oparate the DVD recorder.
2
Insert a recordable disc.
3
Press TIMER.
• If the Timer programming (Standard) menu
appears, press
<
to switch the display to
“VIDEO Plus+.”
4
Press the number buttons to enter the
PlusCode number.
• If you make a mistake, press CLEAR and re-
enter the correct number.
5
Press ENTER.
The date, start and stop times, programme
position, recording mode, PDC setting
(page 52), etc. appear.
• If you want to change the setting, press
<
/
,
to select the item and press
M
/
m
to
change the setting.
6
Select “DVD” for “Media” and press
ENTER.
The Timer List menu (page 55) appears.
If timer settings overlap, a message appears.
To change or cancel a timer recording, select
“Edit” from the Timer List (page 55).
7
Press SYSTEM MENU to turn off the menu.
8
Press
)
/
1
(on/standby) to turn off the
recorder.
The
c
indicator lights up in the front panel
display, and the recorder is ready to start
recording.
If the
c
indicator flashes in the front panel
display, check that a recordable disc is
inserted and that there is enough disc space for
the recording.
To stop recording
Press
x
twice.
Note that it may take a few seconds for the
recorder to stop recording.
If the timer settings overlap
To change or cancel timer recording
See “Changing or Cancelling DVD Timer Settings
(Timer List)” on page 55.
z
Hints
• You can play the recorded programme by selecting the
programme title in the Title List menu.
• You can use the recorder after setting the timer. Just
press
)
/
1
to turn on the recorder. Turn off the recorder
to return it to recording standby before the timer
recording starts.
• When the start time and the programme position or
input source to be recorded are the same but the
“Media” setting differs, the programme is recorded to
both the DVD disc and the VHS tape.
• You can also turn on the timer programming menu
from the System Menu. Press SYSTEM MENU to
select “Timer,” and select “Timer - VIDEO Plus+.”
Notes
• To record a satellite programme, turn on the satellite
tuner and select the satellite programme you want to
record. Leave the satellite tuner turned on until the
recorder finishes recording. If you connect equipment
with a timer function, you can use the Synchro Rec
function (page 54).
• Even when correctly set, the programme may not be
recorded if another recording is underway, or other
prioritized timer setting overlaps.
• Before the timer recording starts, “TIMER REC”
flashes in the front panel display.
• The recorder automatically turns off when a timer
recording finishes.
• The recorder does not record programmes with Copy-
Never signals. Such recordings stop after a few
seconds.
• The beginning of some recordings may not be made
when using the PDC function.
Set VIDEO Plus+ code number.[0~9]
Standard
Timer – VIDEO Plus+
Setup
Disc Setting
Edit
Title List
Timer
Dubbing
10:10
01
DVD
04/15
09:00
10:00
PR 1
---
--/--
--:--
--:--
----
---
04
---
--/--
--:--
--:--
----
---
05
---
--/--
--:--
--:--
----
---
06
03
---
--/--
--:--
--:--
----
---
02
DVD
04/30
09:15
09:45
PR 2
No Rec To
Date
Start
End
Source Mode
---
---
---
---
SP
SP
Off
Off
Edit
Timer – Standard
10:10
PDC
No.1
:
DVD
:
15/04
09
00
10
00
Prog. 1
SP
Media
Date
Start
Stop
Prog.
Mode
Off
VIDEO Plus+
PDC
