108
TV channels cannot be changed.
,
The channel is disabled (page 94).
,
A timer recording started, which changed
the channels.
The picture from equipment connected to
the recorder’s input jack does not appear
on the screen.
,
If the equipment is connected to the
LINE 1 – TV jack, select “L1” in the front
panel display by pressing PROG +/– or
INPUT SELECT.
If the equipment is connected to the LINE 2
IN jacks, select “L2” in the front panel
display by pressing PROG +/– or INPUT
SELECT.
If the equipment is connected to the LINE
3/DECODER jack, select “L3” in the front
panel display by pressing PROG +/– or
INPUT SELECT.
If the equipment is connected to the DV IN
jack, (this is usually for a digital video
camera connection), select “DV” in the
front panel display by pressing INPUT
SELECT.
The playback picture or TV programme
from the equipment connected through the
recorder is distorted.
,
If the playback picture output from a DVD
player, VCR, or tuner goes through your
recorder before reaching your TV, the copy-
protection signal applied to some
programmes could affect picture quality.
Disconnect the playback equipment in
question and connect it directly to your TV.
The picture does not fill the screen.
,
Set “TV Type” of the “Video Output” in the
“Video” setup in accordance with the
screen size of your TV (page 97).
The picture does not fill the screen, even
though the picture size is set in “TV Type”
of the “Video Output” in the “Video”
setup.
,
The picture size of the title is fixed.
The picture is black and white.
,
Check that “Line1 Output” of the “Scart
Setting” in the “Video” setup is set to the
appropriate item that conforms to your
system (page 98).
,
If you are using a SCART cord, be sure to
use one that is fully wired (21 pins).
GUIDE Plus+ system does not appear.
,
1
Even if you complete “Easy Setup,” TV
programme listings do not appear until the
recorder receives the GUIDE Plus+ data.
2
Turn off the recorder, but do not unplug
it.
3
Wait for 24 hours. It may take several
days for the recorder to receive the GUIDE
Plus+ data for all programme positions. If
the recorder does not receive the GUIDE
Plus+ data after 24 hours, set the host
channel manually (page 50).
,
The postal code is incorrect. Correctly set
your postal code (page 49).
,
When the recorder is connected to a set top
box receiver, the set top box receiver must
be turned on to download the GUIDE Plus+
data.
,
Area numbers that cannot be received using
GUIDE Plus+ are set. Select “Easy Setup”
from “SETUP” in the System Menu, and
follow the on-screen instructions to make
the settings again (page 24).
,
The “Time Lock” function on your cable
box is activated. Set this function to off.
The programme position number in the
programme listing does not match the
broadcast station.
,
There may be more than one channel lineup
for your area. To change the channel lineup,
select “Editor” in the Menu Bar of the
GUIDE Plus+ system (page 51).
GUIDE Plus+ system
