Sony RCP-750, Operating Instructions Manual

Page: 9 / 149

9
Overview
a
RET 1 (return video 1) button
The return video signal is displayed on the viewfinder screen
while the button is held pressed.
b
RET (return video) button and 2/3/4 (return video 2/3/4)
select switch
When other return video systems are used in addition to return
video 1, the signal selected with the 2/3/4 switch is displayed
on the viewfinder screen while holding the RET button
pressed.
The RET 1 button has priority over the RET (2/3/4) button if
both buttons are pressed.
c
DISPLAY/MENU switch
This switch functions the same as the DISPLAY/MENU switch
on the front
(page 7) .
d
ASSIGNABLE button
You can assign a function with ASSIGNABLE REAR on the
<SWITCH ASSIGN1> page of the OPERATION menu.
e
Menu control knob (rotary encoder)
This knob functions the same as the menu control knob on the
front
(page 7) .
f
LEVEL/MIC (intercom level control/microphone)
switch
To determine whether to use the INTERCOM LEVEL control
(page 8) on the front and to turn the intercom headset
microphone ON/OFF.
g
Line select switch
To select the intercom line:
PROD: Producer line
ENG: Engineer line
h
INCOM (intercom) level control
To adjust the intercom audio listening level.
i
PGM1 (program 1) and PGM2 (program 2) controls
To adjust the audio listening level of program 1 or program 2,
respectively.
CE type: Models for PAL areas
1
to
5
are the same as those of the UC type.
f
MIC LINE (intercom microphone line) switch
To select the talk line for intercom:
PROD: To talk over the producer line
OFF: To turn off the headset microphone for the intercom line
ENG: To talk over the engineer line
g
LEVEL switch
REAR: The intercom audio listening level is adjusted with the
ENG or PROD control on this panel.
FRONT: The levels adjusted on the rear panel can be totally
adjusted with the INTERCOM LEVEL control on the front.
h
ENG (engineer line) control
To adjust the intercom audio listening level of the engineer line.
i
PGM1 (program 1) and PGM2 (program 2) controls
To adjust the audio listening level of program 1 or program 2,
respectively.
j
PROD (producer line) control
To adjust the intercom audio listening level of the producer
line.
k
TRACKER control
To adjust the intercom audio listening level at the TRACKER
connector on the connector panel.
Connector panel
a
DC IN (DC power supply input) connector (XLR 4-pin)
For connection to an AC-DN10 AC Adaptor, etc. to supply
power to the camera. (When a CCU is connected, this
connector cannot be used.)
b
DC OUT (DC power supply output) connector (4-pin)
To supply power to a script light or equivalent (12 V DC, max.
0.5 A).
c
TRACKER connector (10-pin)
For external interfaces, such as intercom and tally.
d
RET CTRL (return control) connector (6-pin)
For connection to a CAC-6 Return Video Selector.
e
PROMPTER/GENLOCK/RET IN (prompter signal
output/external sync signal input/VBS return input)
connector (BNC type)
• When a CCU is connected, this connector outputs a VBS
prompter signal.
Note
Switch position INTERCOM LEVEL
control on the front Headset microphone
REAR/ON Inactive ON
REAR/OFF OFF
FRONT/OFF Active
PGM1
ENG PROD TRACKER
PGM2
ASSIGNABLE
2 3 4
RET1 RET
PROD
ENG
OFF
LINE
LEVEL
REAR
FRONT
MIC
INTERCOM EARPHONE
DISPLAY
MENU
OFF
1 2 3 4 5
6 7 8 0 qa 9
DC OUT
AUDIO IN
CH1
CH2
TEST
OUT
SDI
DC IN 10.5-17V
+
48V MIC LINE
+
48V MIC LINE REAR
MIC1
FRONT
REMOTE RET CTRL
PROMPTER
/GENLOCK
/RET IN
TRACKER
1 2 3 4 5 6 7
8 9 0 qa