000
135
11. Appendix
Messages Displayed During Operation
This section describes the meaning of messages that may be displayed in response to button, switch, or knob operation.
[Notes]
ˎ
ˎ
Covers only the messages displayed about possible causes in response to an operation.
ˎ
ˎ
Messages displayed when an operation is attempted while a menu item cannot be selected (grayed out) are not described.
Operation
Message
Meaning and possible cause
REC button was pressed
Media not exist
Cannot record because there is no recording media in an SxS card slot.
Media(Proxy)
Cannot Record
No Media in Slot(Proxy)
Proxy data recording mode is set to On, but cannot record proxy data because the proxy SD card is not inserted.
Media(Proxy)
Cannot Record
Media(Proxy) Error
Cannot record proxy data because cannot write to the proxy SD card due to a media error.
Media(Proxy)
Cannot Record
Media(Proxy): Write Protected
Cannot record proxy data because the proxy SD card is write-protected.
Media(Proxy)
Cannot Record
NG: Preparing
Cannot record proxy data because the proxy data recording circuitry initialization is not completed.
Assignable switch assigned with XAVC
Proxy Rec Start was operated
Media(Proxy)
Cannot Record
No Media in Slot(Proxy)
Cannot record proxy data because the proxy SD card is not inserted.
Media(Proxy)
Cannot Record
Media(Proxy) Error
Cannot record proxy data because cannot write to the proxy SD card due to a media error.
Media(Proxy)
Cannot Record
Media(Proxy): Write Protected
Cannot record proxy data because the proxy SD card is write-protected.
Media(Proxy)
Cannot Record
NG: Preparing
Cannot record proxy data because the proxy data recording circuitry initialization is not completed.
PREV button was pressed
First Clip Top!
Cannot execute because the playback position is at the first frame of the first clip.
F REV button was pressed
First Clip Top!
Cannot execute because the playback position is at the first frame of the first clip.
PREV + F REV buttons were pressed
First Clip Top!
Cannot execute because the playback position is at the first frame of the first clip.
PLAY button was pressed
Last Clip End!
Cannot execute because the playback position is at the last frame of the last clip.
NEXT button was pressed
Last Clip End!
Cannot execute because the playback position is at the last frame of the last clip.
F FWD button was pressed
Last Clip End!
Cannot execute because the playback position is at the last frame of the last clip.
NEXT + F FWD buttons were pressed
Last Clip End!
Cannot execute because the playback position is at the last frame of the last clip.
Media slot was changed
Cannot Switch Slots
Cannot change slots during playback.
Recording media was removed
Media removed
Media was removing while reading from recording media or while writing to recording media (ACCESS indicator is lit).