000
7. Menu Display and Settings: Assigning Functions to Assignable Switches
113
Functions That Can Be Assigned to the ASSIGN. 1 and 3 Switches, the
ASSIGNABLE 4 and 5 Switches, and the ONLINE Button
Assignable Switch setting Function
State when camcorder is
next powered on
Off
No assignment
—
Front Mic
Switches between stereo (On) and monaural (Off)
when a stereo microphone is connected.
Setting retained
Marker
Turns the display of all markers on/off.
Setting retained
ATW
Turns ATW (auto tracing white balance) mode on/
off.
Setting not retained
ATW Hold
Hold the white balance setting in the ATW mode. —
Turbo Gain
Executes Turbo Gain according to the setting of
Operation >Gain Switch >Gain Turbo.
Setting not retained
Rec Review
Executes recording review.
—
Rec
Starts or stops recording.
—
NFC
Executes the NFC function.
—
Network Client Mode
Turns network client mode on/off.
Setting retained
Streaming
Turns streaming transmission on/off.
Setting not retained
Auto Upload(Proxy)
Turns proxy file auto transfer on/off.
Setting retained
Picture Cache Rec
Turns picture cache recording mode on/off.
Setting retained
Spotlight
Turns the spotlight function in auto iris mode on/
off.
Setting retained
Backlight
Turns the backlight function in auto iris mode on/
off.
Setting retained
VF Mode
Switches the viewfinder screen between B&W
(On) and color (Off).
Setting retained
Video Signal Monitor
Switches the video signal monitor display
function.
Setting retained
Lens Info
Switches the depth of field indication between
off, displayed in meters, and displayed in feet.
Setting retained
Zoom Tele/Wide
When a lens that supports serial communication
is installed, assigns the Zoom Tele function to
ASSIGNABLE 4, and assigns the Zoom Wide
function to ASSIGNABLE 5 (displayed only when
<4> and <5> are set).
—
Zoom Wide/Tele
When a lens that supports serial communication
is installed, assigns the Zoom Wide function to
ASSIGNABLE 4, and assigns the Zoom Tele
function to ASSIGNABLE 5 (displayed only when
<4> and <5> are set).
—
Assignable Switch setting Function
State when camcorder is
next powered on
Manual Focus Assist
Turns the manual focus assist function on/off.
Setting retained
Focus Magnifier
Turns the focus magnification function on/off.
Setting not retained
Zebra
Turns zebra display on/off.
Setting not retained
Lens RET
Rec Review (if playback is allowed)
—
Shot Mark1
Writes Shot Mark1.
—
Shot Mark2
Writes Shot Mark2.
—
Clip Flag OK
Adds/Clears an OK mark to/from the clip being
recorded or played.
Setting not retained
Clip Flag NG
Adds/Clears an NG mark to/from the clip being
recorded or played.
Setting not retained
Clip Flag Keep
Adds/Clears a KP (Keep) mark to/from the clip
being recorded or played.
Setting not retained
Color Temp SW 3200K
Adjusts white balance using 3200K preset value.
Setting retained
Color Temp SW 4300K
Adjusts white balance using 4300K preset value.
Setting retained
Color Temp SW 5600K
Adjusts white balance using 5600K preset value.
Setting retained
Color Temp SW 6300K
Adjusts white balance using 6300K preset value.
Setting retained
Electrical CC
Function that switches the electrical CC filter
(3200K/4300K/5600K/6300K) applied to white
balance adjustment values.
Sequence with each press of the switch/button:
3200K
4300K
5600K
6300K
Can be changed using menu settings (Electrical
CC <A> <B> <C> <D>).
[Note]
This function is not available when Maintenance >White
Filter >ND Filter C.Temp in the setup menu is set to On.
If you set ND Filter C.Temp to On after assigning the
function, the assignable switch ceases to function.
Setting retained
CC5600K
Applies a 5600K electrical CC filter to white
balance adjustment values.
Setting retained
Clip Continuous Rec
Turns Clip Continuous Rec mode on/off.
Setting not retained
Slot Select
When recording media is loaded in both card
slots A and B, selects the card you want to use.
—
Flash Band Reduce
1)
Turns the flashband correction function on/off.
Setting not retained
XAVC Proxy Rec Start
Starts/stops proxy recording.
Setting not retained
1) Even when Flash Band Reduce is set to On, the function does not operate if the SHUTTER switch is set to ON.
