Sony PXW-FS5 Page 50 Operating Manual Download

Page: 50 / 200

Adjusting the brightness

You can adjust the brightness by
controlling the amount of light, etc., using
iris, ISO sensitivity/gain, shutter speed, or
ND filter.

Note

• When you set the FULL AUTO button on (lit),

the iris, ISO sensitivity/gain, shutter speed, and
white balance are adjusted automatically. You
cannot adjust them manually.

Press the FULL AUTO button

to set full auto mode off.

Press the IRIS button

next to the iris value disappears.

Set the ND/IRIS switch

to the

“IRIS” position.

Turn the ND/IRIS dial

to adjust

the value.

The volume of the light increases the
more that you open the aperture
(decreasing F value). The volume of the
light decreases the more that you close
the aperture (increasing F value).

To temporarily adjust the iris
automatically

Press and hold the IRIS PUSH AUTO
button

The iris is adjusted automatically for as
long as you hold the button down.

To adjust automatically

Press the IRIS button

appears next to the iris value.

Tips

• Can be operated using Direct Menu (p. 61).
• You can assign this function to the ASSIGN dial

(p. 85).

• The range of focus, an important effect of the

aperture, is called the depth of field. The depth
of field gets shallower as the aperture is opened,

Adjusting the iris

Iris value

Summary of Contents for PXW-FS5









































































































































































































Search results

Summary of Contents for PXW-FS5

Reviews:

Related manuals for PXW-FS5

Brands by name

Popular brands

Sony PXW-FS5, Operating Manual

Search results

Summary of Contents for PXW-FS5

Reviews:

Related manuals for PXW-FS5

Brands by name

Popular brands