Sony PXW-FS5, Operating Manual

Page: 105 / 200

105
Re
cor
d
in
g
BLACK LEVEL
To set the black level.
GAMMA
To select a gamma curve.
BLACK GAMMA
To correct gamma in low intensity area.
Item Description and settings
Sets the black level.
–15 to +15
Item Description and settings
[STANDARD] Standard gamma curve for movies
[STILL] Gamma curve like an interchangeable-lens still camera movie.
[CINE1] Makes soft color images by decreasing dark area contrast and
sharpening bright area tone changes (HG4609G33 equivalent).
[CINE2] Almost the same effect as [CINE1]; select this if you want to treat the
image in a range within 100% of video signal when editing, etc.
(HG4600G30 equivalent).
[CINE3] Increases contrast between bright areas and dark areas more than
[CINE1] and [CINE2], sharpening dark area tone changes.
[CINE4] Increases dark area contrast more than that of [CINE3]. The dark area
contrast is weaker and the bright area contrast is stronger than that of
[STANDARD].
[ITU709] Gamma curve that corresponds to ITU-709. Gain in low intensity area:
4.5
[ITU709(800%)] Gamma curve for checking scenes when shooting using [S-LOG2] or
[S-LOG3].
[S-LOG2] [S-LOG2] gamma curve. This setting presumes editing in post-
production after recording.
[S-LOG3] [S-LOG3] gamma curve. Gamma curve with characteristics similar to
film, and which presumes editing in post-production after recording.
Item Description and settings
[RANGE] Selects a correcting range.
HIGH / MIDDLE / LOW
[LEVEL] Sets the correcting level.
–7 (maximum black compression) to +7 (maximum black stretch)
Continued ,