Sony PXW-FS5 Page 30 Operating Manual Download

Page: 30 / 200

Turn the lock knob clockwise to
secure the LCD screen.

Note

• Securely tighten the LCD screen knob before

use. The LCD screen may fall off if the unit is
used without securely tightening the knob.

Align the “LCD

” mark on the

camcorder with the “

” mark on

the LCD screen connection jack,
and plug in the cable.

Check the cable orientation to make
sure the

faces outwards, and then

insert the cable.

To remove the cable

Press both sides (

and

) of the LCD

screen connection jack, and then remove
the connector.

To change the angle of the LCD screen

See “Step 6: Adjusting the LCD screen and
viewfinder” (p. 34).

Step 4: Attaching the handle, accessory shoe, microphone, LCD screen,
and grip (continued)

Summary of Contents for PXW-FS5









































































































































































































Search results

Summary of Contents for PXW-FS5

Reviews:

Related manuals for PXW-FS5

Brands by name

Popular brands

Sony PXW-FS5, Operating Manual

Search results

Summary of Contents for PXW-FS5

Reviews:

Related manuals for PXW-FS5

Brands by name

Popular brands