Sony PXW-FS5 Operating Manual Download Page 177

Page: 177 / 200

177

rou
bl

oot
in

If a warning message is displayed, follow
the instructions.

The following error messages may appear if
trouble occurs during FTP transfer or
streaming distribution. Try the solution
suggested on the display.

No registered access point.

There are no access points registered.
Select

(NETWORK SET)

[ACCESS POINT SET], and register an
access point.

Cannot find connectable access
point.
Set the access point setting.

An access point could not be found. Select

(NETWORK SET)

[ACCESS

POINT SET], and check the access point
settings.

Connection to the access point
failed.
Please input your password again.

Could not connect to the access point. Try
re-entering the password for the access
point.

Connection with an access point
disconnected.
Check the connection condition.

Connection to the access point was
disconnected. Check the access point
connection conditions.

No response from the access point.

There was no response from the access
point. Check the connection with the
access point.

Failed to acquire an IP address.
Change the IP address setting.

Could not acquire the IP address.
If connecting to a network via a wireless
LAN, select

(NETWORK SET)

[ACCESS POINT SET], and specify the
IP address manually.
If connecting to a network via a wired
LAN, select

(NETWORK SET)

[WIRED LAN SET], and specify the IP
address manually.

Network error occurred.

A Wi-Fi communication error occurred.

Check the LAN cable connection.

Could not connect to the network. Check
the LAN cable connection.

Failed to connect to an FTP server.
Check the FTP server settings.

Check the registered FTP server settings.

Failed to connect to an FTP server.

Connection to the FTP server failed
because the FTP server could not be found
or for other reasons.

Could not verify the certificate.

The FTP server certificate is not valid.

Connection to the FTP server
disconnected.

Connection to the FTP server was
disconnected.

Cannot upload to the FTP server.

Connection to the FTP server was
successful, but a file could not be
transferred. Check the transfer destination
directory settings and the settings on the
FTP server.

Unable to access the media.

The memory card could not be loaded.
The memory card may be damaged.

Warning messages

Error messages

Summary of Contents for PXW-FS5









































































































































































































Search results

Summary of Contents for PXW-FS5

Reviews:

Sony PXW-FS5, Operating Manual, Page: 177 / 200

Search results

Summary of Contents for PXW-FS5

Reviews: