Sony Power HADFX HDC-P1, Maintenance Manual

Page: 97 / 238

4-9 (E)
HDC-P1
For lens compatible with serial communication
1. Check that the lens number is 17.
2. Also check the lens name and minimum f-stop value that are set automatically.
3. Turn on the dynamic shading.
Adjust the white shading or V modulation only when the deviation occurs. In this case, the data is not
stored in the lens
fi le.
.
Automatic white shading adjustment
Shoot the white pattern so that the video level is around 560 mV (80%).
[MAINTENANCE]
→
[WHITE|SHADING]
→
[AUTO|WHITE|SHADING]
Or adjust the R/G/B/ white shading V SAW, V PARA, H SAW, and H PARA.
[MAINTENANCE]
→
[WHITE|SHADING]
→
[V|SAW|R/G/B]
,
[V|PARA|R/G/B]
,
[H|SAW|R/G/B]
,
[H|PARA|R/G/B]
.
V modulation adjustment
Shoot the white pattern, and fi ne-adjust it with V modulation R/G/B/Master so that the video level
is around 560 mV (80%) with the lens iris set around F4 and the zoom control in the center of the
ring.
[PAINT]
→
[VIDEO|LEVEL]
→
[V|MOD|R/G/B/M]
4. Set the lens extender to OFF.
5. Adjust the white balance and
fl are balance with the grayscale chart.
6. Zoom the lens and adjust the center marker to a position at which the object does not deviate.
n
The center marker is not stored by lens fi le store, but is stored immediately after the adjustment is
completed.
Note that the center marker is stored in the lens fi le when it is changed even in the normal use.
7. Execute lens fi le store.
[FILE]
→
[LENS|FILE]
→
[STORE|FILE]
8. Set the lens extender to ON and repeat steps 5 to 7.
Calling
Using OPERATION Menu of This Unit
Select the lens fi le that is set by selecting
[OPERATION]
→
[LENS|FILE]
.