Sony Power HADFX HDC-P1, Maintenance Manual

Page: 48 / 238

2-12 (E)
HDC-P1
2-7-7. AT-163APT Board
1. Remove the side panel (L) assembly and the
side panel (R) assembly. (Refer to Section 1-5.)
2. Remove the rear panel assembly.
(Refer to Section 2-6.)
3. Remove the IF-1129 board.
(Refer to Section 2-7-5.)
4. Pull out the AT-163APT board.
5. Connect the AT-163ATP board to the connector
(CN2) on the MB-1158 board while pressing
the MB-1158 board from the arrow direction.
m
.
Insert the AT-163ATP board into the groove
between the bottom cover and the sub-
chassis.
.
Connect the connector (CN2) on the AT-
163ATP board fi rmly to the connector
(CN2) on the MB-1158 board.
6. Install the removed parts by reversing steps 1
to 3 of removal.
AT-163APT board
CN2
CN2
MB-1158 board
Sub-chassis
Bottom cover
Groove
Groove
AT-163APT board
CN2
CN2
MB-1158 board
Sub-chassis
Bottom cover
Groove
Groove