Sony Power HADFX HDC-P1, Maintenance Manual

Page: 94 / 238

4-6 (E)
HDC-P1
4-5. Reference File
Reference fi le stores the differential data taking the factory-setting as 0. Therefore, initializing the refer-
ence fi le brings the settings to the same status at the factory setting. If lens fi le or OHB fi le retains the
data, they need to be initialized as well. To initialize data, use the setup menu. You can select all fi le items
or only speci fi ed items to initialize.
Reference fi les can be stored in the camera and Memory Stick Duo. Reference fi les can also be stored in
the Memory Stick Duo if the master setup unit (MSU) is used. For details, refer to the MSU operation
manual.
Data is stored and called using the setup menu or MSU.
Reference
fi les can be copied between cameras using the Memory Stick Duo.
n
Before storing data in the Memory Stick Duo, make sure that the LOCK switch on the Memory Stick Duo
is set to OFF.
Storing (Refer to step 1 of Fig.4-4.)
Using FILE Menu of This Unit
[FILE]
→
[REFERENCE]
→
[STORE|FILE]
The data is stored in the camera and the numerical data is displayed as 0. (Excluding some items. Refer to
“Section 4-8 File Items”.)
With MSU
Press the FILE button. Then select
[Reference]
→
[Ref|Store]
. The data is stored in the camera and the
numerical data is displayed as 0. (Excluding some items. Refer to “Section 4-8 File Items”.)
Calling (Refer to step 2 of Fig. 4-4, Fig. 4-1.)
Using PAINT Menu of This Unit
[PAINT]
→
[SCENE|FILE]
→
[STANDARD]
The temporary paint amount and scene fi le amount are cleared, and the state when the reference fi le was
stored is restored.
With MSU
Press the STANDARD button to restore the reference fi le items when they were stored.