Sony PMW-PZ1, Service Manual

Page: 62 / 78

5-10. DC Fan (60 Square)
Preparation
1. Remove the top panel. (Refer to “5-2. Top Panel” )
2. Remove the front panel assembly. (Refer to “5-3. Front Panel Assembly” )
3. Remove the front chassis assembly. (Refer to “5-9. Front Chassis Assembly” )
Procedure
1. Remove the two screws, and remove the DC fan (60 square).
DC Fan (60 Square)
Prevention of incorrect installation
Front chassis assembly
Holes
Holes
Label
Harness
PSW3 x 20
PSW3 x 20
Note
When installing the DC fan (60 square), note the following instructions.
• Pay attention to the position of the label and harness.
• Align the two bosses with the two holes.
2. Install the removed parts by reversing the steps of removal.
PMW-PZ1
5-18