Sony PMW-PZ1, Service Manual, Page: 59 / 78

2. Remove the SSD module (mSATA) from the connector (CN6202) on the HPR-56 board in the direction of the
arrow C.
Note
The cushion has strong adhesive power. When removing the cushion, note the following instructions.
• Do not apply excessive force to the HPR-56 board and the SSD module (mSATA).
• Do not damage electrical parts mounted on the back side of the SSD module (mSATA) and components on
the HPR-56 board with tools.
Stopper
A
A
C
B
Stopper
Black part
Cushion
SSD module (mSATA)
SSD module (mSATA)
SSD module
(mSATA) )
Cushion
Cushion
Electrical parts
HPR-56 board
CN6202
CN6203
Back side of SSD module (mSATA)
Note
When installing the SSD module (mSATA), note the following instructions.
• Insert the SSD module (mSATA) securely into the connector (CN6202).
• Do not connect the SSD module (mSATA) to the connector (CN6203).
3. Remove the cushion from the SSD module (mSATA).
4. Install the removed parts by reversing the steps of removal.
5-8-2. Replacement (Screw Type)
Preparation
1. Remove the top panel. (Refer to “5-2. Top Panel” )
PMW-PZ1
5-15