Sony PMW-PZ1, Service Manual

Page: 65 / 78

5. Install the front chassis assembly.
(1) Install the front chassis assembly and temporarily tighten the screw (a).
(2) Tighten the screw (b).
(3) Connect the harness to the connector (CN5601) on the HPR-56 board.
(a)
PSW3 x 6
(b)
PSW3 x 6
Front chassis assembly
Harness
HPR-56 board
CN5601
6. Tighten the screw (BTP3 x 8), the screw (B3 x 4), and the two screws (B2.6 x 5).
Note
Tighten the screws in the following sequence: (a), (b), (c), (d).
(a)
B2.6 x 5
(b)
B2.6 x 5
(c)
B3 x 4
(Tightening torque
： 0.60 ±0.05 N·m)
(d)
BTP3 x 8
(Tightening torque
：
0.85 ±0.05 N·m)
PMW-PZ1
5-21