2-14 (E)
PMW-EX1R
8. Remove the four screws of
f
.
9. Remove the center frame rear carefully not to
damage the CN-3273 board.
10. Remove the
fl
ex board holder in the direction
of the arrow.
11. Disconnect the harness and coaxial cable with
connector from the connectors on the TX-131
board.
f
f
f
: M2
x
3 (silver)
Center frame rear
CN-3273 board
TX-131 board
Harness
Coaxial cable
with connector
Flex board
holder
12. Remove the screw of
g
, and remove the
main harness holder.
13. Disconnect the coaxial cable from the coaxial
connector.
14. Remove the two screws of
h
, remove the
coaxial connector.
15. Remove the four screws of
i
, remove the
bottom plate.
h
g
h
i
i
i
g
: M2
x
3 (silver)
h
: M2
x
3 (silver)
i
: M2
x
3 (silver)
Coaxial cable
Coaxial connector
Bottom plate
Main harness
holder
k
k
k
: B2
x
3 (silver)
Coaxial cable
TX-131 board
16. Disconnect the coaxial cable from the con-
nector on the TX-131 board.
17. Remove the four screws of
k
, and remove
the TX-131 board.
18. Reinstall the battery case and the TX-131
board by reversing the steps of removal.