2-13 (E)
PMW-EX1R
2-2-12. Battery Case, TX-131 Board
1. Refer to Sections from 2-2-1 to 2-2-5 and
disassemble the unit up to “Handle Assem-
bly” removal.
2. Refer to Sections from 2-2-8 to 2-2-11 and
disassemble the unit up to “RE-272 Board
and RE-273 Board” removal.
3. Remove
the
fi
ve screws of
a
, and remove
the battery case assembly.
4. Remove the two screws of
b
, and remove
the bottom support assembly.
n
When replacing the battery case assembly, be sure
to also replace the battery case gasket and the
inside bottom gasket at the same time.
b
: M2
x
3 (silver)
a
: M2
x
4 (black)
a
a
a
a
a
Battery case assembly
Bottom support
assembly
b
Battery case gasket
Inside bottom gasket
5. Remove the screw of
c
, and remove the
CN-3273 board from the i-Link holder.
6. Remove the screw of
d
.
7. Remove the three screws of
e
, and remove
the i-Link holder.
i-Link holder
CN-3273 board
: M2
x
2 (black)
: M2
x
3 (silver)
: M2
x
3 (silver)