2-4 (E)
PMW-EX1R
2-2-3. Microphone Holder Assembly
1. Open the microphone holder assembly.
2. Remove the two screws, and remove the
microphone holder assembly.
3. Reinstall the microphone holder assembly by
reversing the steps of removal.
Microphone holder
assembly
B2.6
x
6
2-2-4. EVF Assembly
1. Remove the microphone holder assembly.
(Refer to Section 2-2-3.)
2. Remove the four screws.
3. Disengage the two claws on the front of the
handle cover (upper) assembly
fi
rst. Then
remove the rear of the handle cover (upper)
assembly from the EVF assembly.
n
Be careful not to drop the rubber SW key.
M2
x
4
(black)
M2
x
4
(black)
Claws
Rubber SW key
Handle cover
(upper)
assembly