Sony PMW-300, Service Manual

Page: 61 / 134

2-11. Handle Block
2-11-1. Handle Assembly
Preparation
1. Remove the bottom panel assembly. (Refer to “2-5. Bottom Panel Assembly” )
2. Remove the inside panel assembly. (Refer to “2-6-1. Inside Panel Assembly” )
3. Remove the outside panel assembly. (Refer to “2-7-1. Outside Panel Assembly” )
4. Remove the rear panel assembly. (Refer to “2-8. Rear Panel Assembly” )
Procedure
1. Remove the five screws to detach the top panel in the direction of the arrow.
Precision screws
(P2 x 5)
Precision screws
(P2 x 5)
Precision screw
(P2 x 5)
Top panel
Top panel
2. Disconnect the HN-413 board from the connector in the IF-1244 board.
PMW-300
2-33