1-5.
Updating the Firmware
Update the firmware from a personal computer (PC) through a USB connection. Though the firmware can be updated
using an SxS memory card that contains the update data, firmware update using the high-speed stable USB interface is
recommended in this manual.
Preparation
1.
Check the current firmware version indicated in "Version" of the OTHERS menu.
2.
Install the update software in the PC.
Note
For how to obtain the update software, contact your local Sony Sales Office/Service Center.
When a PC is connected to the unit for the first time, driver software need to be installed in the PC. For details,
check the readme file supplied with the update software.
Procedure
1.
Check that the power switch on the unit is turned OFF.
2.
Remove the screw from the rear panel to detach the USB cover.
USB cover
USB maintenance connector
Precision screw
M2 x 5
3.
Connect the PC to the USB maintenance connector on the unit with a mini USB cable.
4.
Turn ON the power of the unit.
5.
Run the firmware update software on the PC.
6.
After the firmware update is completed, turn OFF the power and disconnect the mini USB cable.
7.
Attach the USB cover with the removed screw.
8.
Turn ON the power and confirm that the firmware version has been updated in "Version" of the OTHERS menu.
PMW-300
1-14
