Sony PMW-300, Service Manual

Page: 65 / 134

2-11-4. AXM-50 Board
Preparation
1. Remove the bottom panel assembly. (Refer to “2-5. Bottom Panel Assembly” )
2. Remove the inside panel assembly. (Refer to “2-6-1. Inside Panel Assembly” )
3. Remove the outside panel assembly. (Refer to “2-7-1. Outside Panel Assembly” )
4. Remove the rear panel assembly. (Refer to “2-8. Rear Panel Assembly” )
5. Remove the handle assembly. (Refer to “2-11-1. Handle Assembly” )
6. Remove the handle U-case assembly. (Refer to “2-11-2. Handle U-case Assembly” )
7. Remove the KSW-65 board. (Refer to “2-11-3. KSW-65 Board” )
Procedure
1. Remove the two screws (B2 x 5) to detach the microphone bracket.
PMW-300
2-37