2-3-6.
SW-1603 Board/VR-351 Board
Preparation
1.
Remove the elbow assembly. (Refer to
)
Procedure
1.
Remove the four screws to detach the VF case (front).
VF case (front)
B2 x 5
B2 x 5
2.
Remove the four screws to detach the LCD block.
P2 x 3
LCD block
P2 x 3
3.
Disconnect the harness from the connector (CN100) on the VR-351 board.
4.
Remove the screw to detach the VR-351 board.
5.
Disconnect the harness from the connector (CN100) on the SW-1603 board.
6.
Remove the three switch knobs (VF).
PMW-300
2-14
