Sony PMW-300, Service Manual

Page: 53 / 134

2-7. Outside Section
2-7-1. Outside Panel Assembly
Preparation
1. Remove the VF assembly. (Refer to “2-3-1. VF Assembly” )
2. Remove the bottom panel assembly. (Refer to “2-5. Bottom Panel Assembly” )
Procedure
1. Remove the six screws and pull out the outside panel assembly in the direction of the arrow.
2. Disconnect the two harnesses from the connector on IO-258 board and connector on IO-260 board and detach the
outside panel assembly.
Connector
(IO-258 board)
Connector
(IO-260 board)
P2 x 5
P2 x 5
P2 x 5
Outside panel assembly
Harnesses
3. Install the removed parts by reversing the steps of removal.
PMW-300
2-25